New posts (0/91483)
Manifest season 4 release updates, cast, synopsis, filming ...

03-03-2022 · Technically, Manifest season 4 does not have a release date. Netflix has not come out and confirmed that, however, series creator Jeff Rake spilled the beans on Twitter in …

03-03-2022

MANIFEST -- "Wingman" Episode 303 -- Pictured: (l-r) Ali Lopez-Sohaili as Eagan Tehrani, Josh Dallas as Ben Stone -- (Photo by: Peter Kramer/Warner Brothers)

Manifest season 4 is officially happening at Netflix! Fans of the drama series had been keeping a close eye ever since its cancellation to see which streamer could potentially save the day and bring it back to life, and our favorite platform is fortunately the one to do it!

Manifest was added to Netflix in June 2021, right before the Manifest season 3 finale aired on NBC. The show was one of the top shows and movies on Netflix for at least two months.

Only the first two seasons of Manifest were added to Netflix in June 2021, but fans were pleasantly surprised when Manifest season 3 dropped without warning in August.

By the time Netflix fans binged season 3, everyone was desperate to find out if season 4 would ever happen. If you’ve seen the social media push for someone to save the show, you’ll know that this fanbase is super dedicated and there’s certainly an audience for another installment. So, below you can find out everything we know about Manifest season 4 right now.

How many seasons of Manifest are there?

So far, there are three seasons of Manifest. The first season premiered on NBC in 2018. The season 3 finale aired on NBC on June 10, 2021. All three seasons of Manifest are available to stream on Netflix.

Will there be a season 4 of Manifest?

As of August 28, 2021, Manifest season 4 is officially in the works! The day has been dubbed “828 Day” by fans because of Flight 828 in the series. We were hoping Netflix would deliver good news to commemorate the day, and we were right! Per a press release sent out on 828 Day, another season is happening and it will mark the show’s last.

In case you aren’t up to date with the show’s history, Manifest was canceled after three seasons. That was announced in June 2021 after the season 3 finale aired.

In July, we learned that Netflix and NBC were back in talks with Warner Bros. TV to save Manifest and bring back the series for season 4, according to a report from Deadline. By August, Netflix was officially in talks with the writers and cast to bring back, save the show, and order Manifest season 4, per another report from Deadline.

It didn’t take long for Netflix to announce that it had officially saved Manifest. This is the most excited I’ve been for a show the platform revived since Lucifer and Cobra Kai.

Manifest season 4 episode count

Also announced on 828 Day was that Manifest season 4 will be 20 episodes long, which is much longer than other titles on the platform. Netflix usually sticks to 8-10 episodes per season. According to the press release, the final season will be “presented in parts to be determined,” meaning it will likely be broken up into two or more parts.

We’re not sure why Netflix decided to present the final 20 episodes of Manifest this way instead of doing two more seasons, but we’re just happy we’re getting more content at all!

When is Manifest season 4 filming?

Filming on season 4 of Manifest began in Nov. 2021 in New York. The cast and crew got back to work at Silvercup Studios, and stars such as Melissa Roxburgh and Josh Dallas didn’t hesitate to give us some behind-the-scenes shots and filming hints.

Check out all the BTS posts we’ve seen from the cast so far right here!

View this post on Instagram

A post shared by J.R. Ramirez (@jr8ramirez)


Dallas’ wife Ginnifer Goodwin teased that Manifest season 4 would wrap sometime in late 2022, but that hasn’t been confirmed by Netflix.

Writing on season 4 began almost immediately after it was saved, as announced by creator Jeff Rake and the writing team. Because they were able to get an early start on the final season, the cast and crew were able to move right into production in late 2021.

Manifest season 4 cast

Check out the official cast list for Manifest season 4:

  • Melissa Roxburgh as Michaela Stone
  • Josh Dallas as Ben Stone
  • J. R. Ramirez as Jared Vasquez
  • Luna Blaise as Olive Stone
  • Parveen Kaur as Saanvi Bahl
  • Matt Long as Zeke Landon
  • Holly Taylor as Angelina Meyer
  • Ty Doran as Cal Stone
  • Daryl Edwards as Robert Vancev

In Nov. 2021, it was confirmed that Matt Long would return for season 4 as a series regular.

Will Grace be in season 4 of Manifest? That’s a major question Manifesters are asking going into the upcoming final season on Netflix, but we should prepare for disappointment. As the main cast locked in new deals to appear in the new season on Netflix, some cast members were promoted to series regulars while others unfortunately will be leaving the show.

Manifest season 4 synopsis

Without giving away spoilers from the exciting Manifest season 3 finale, the fourth season will continue to put the pieces together for the endgame. A major character returned, a major character faced tragedy, and the 828s learned new information that could help solve the mystery.

As the death date draws nearer for the Flight 828 passengers, it’s a race against the clock for Ben, Michaela, Saanvi, and the whole team to figure out what happened to them, where they went, and how to save themselves from the time on their second chance running out.

Josh Dallas spoke about season 4 in Dec. 2021, giving us a tease for what we can expect from his character Ben. “To be honest… he’s not in a great place,” the actor said. Get the tissues ready for the new season!

Does Manifest season 4 have a release date?

Technically, Manifest season 4 does not have a release date. Netflix has not come out and confirmed that, however, series creator Jeff Rake spilled the beans on Twitter in Feb. 2022. While replying to a tweet from author Stephen King, Rake revealed Manifest should be returning in Nov. 2022. That’s huge news to share so casually, but fans are so excited that he did!

Of course, November is simply an estimate because Netflix has not confirmed or denied. We’ll have to wait for an official announcement regarding the release date. But for now, we’re happy to think Manifest could be returning this fall.

Stay tuned for more Manifest news and updates from Netflix Life!

Next: Best Netflix shows to watch if you like Manifest

FanSided Staff contributed to this report.

How To Delete Netflix Watch History From Any Device ...

31-01-2022 · To delete Netflix viewing history using a Windows PC or Mac, log in to the Netflix account using a browser and click on the profile icon at the top-right corner. On the drop-down menu, select 'Account' and then open 'Profile & Parental Controls' for the profile that needs to be updated. Now click on the 'View' button next to 'Viewing

31-01-2022

Netflix users can easily delete their viewing history if they want to remove suggestions for similar content from their profile. Here's how.

Netflix users can easily remove their viewing history from any device if they don't want anybody else to know what they watched on the platform. Unfortunately, doing so would also remove suggestions for similar content from their profile, which means deleting viewing history might not be a good idea for users wanting more recommendations based on their viewing habits. Either way, it is easy to delete viewing history on Netflix, although it can only be done from the website and not the Netflix mobile apps.

Netflix stores viewing history on its server rather than on the device, which means deleting it from one device removes it from all devices. So, for example, removing the viewing history on the Netflix website using a computer would remove it from all other devices, including smart TVs, smartphones, Xbox, PlayStation and more. However, Netflix says it might take a while for the change to reflect across all devices, which means the deletion might not happen immediately.

To delete Netflix viewing history using a Windows PC or Mac, log in to the Netflix account using a browser and click on the profile icon at the top-right corner. On the drop-down menu, select 'Account' and then open 'Profile & Parental Controls' for the profile that needs to be updated. Now click on the 'View' button next to 'Viewing Activity.' Finally, hit the 'slashed circle' symbol next to a title to remove it from the list. While this will only delete a particular episode, users can also hide the entire series from their viewing list. To do that, click on the 'Hide Series?' button that will pop up after hiding an episode. Users can also hide their entire viewing history at once by hitting the 'Hide all' button at the bottom of the page and then confirming the decision on the next page by clicking on 'Yes, hide all my viewing activity.' Netflix says it will take up to 24 hours for the change to reflect in that account.

Delete History To Remove Unwanted Suggestions

As mentioned already, users can delete their viewing history using the Netflix website but not the mobile apps. The process can be initiated on the Android and iOS apps, but users will still take them to the website to get the job done. Deleting viewing history is a good way of removing unwanted suggestions. It works best when someone has watched a program that they do not particularly like and do not want future recommendations based on that activity.

There are a few things to remember while trying to hide viewing history from Netflix. First off, users can't hide titles watched from kids' profiles, which is by design, so parents can keep a tab on what their children are watching. Secondly, there's no way to get the history back once deleted, so be cautious before removing viewing history. Finally, once any content is deleted from Netflix viewing history, it will be automatically removed from 'Continue Watching Now.'

Next: Protect Your iPhone Before Lending It To Someone Else — Here's How

Source: Netflix

Most Anticipated 2022 Movies (Still To Come)
Related Topics
How to Enter Sequential Numbers in Excel? 4 Easy Ways ...

23-12-2021 · Select all cells of the dataset. Navigate to Insert -> Table. Alternatively, you could simply press the shortcut CTRL+T from your keyboard.

23-12-2021

Sequential numbers are an ordered list of consecutive numbers. It can sometimes be needed to have your rows numbered with sequential numbers.

For example, if you have a dataset of different stores in a state, you may want to number the rows and so we have a unique number for each store.

Excel provides multiple ways to enter sequential numbers (also called serial numbers). In this tutorial we will look at 4 such ways:

  • Using the Fill handle feature
  • Using the ROW function
  • Using the SEQUENCE function
  • Converting the dataset into a table

Let us take a look at each of these methods one by one to enter serial numbers in Excel.

Using the Fill Handle Feature to Enter Sequential Numbers in Excel

Excel’s Fill Handle feature is smart enough to identify patterns in your data and project the pattern to the rest of the cells in a column.

Say you have the following dataset and you want to enter a sequence of numbers starting from 1 (in the second row) all the way to the last row.

Dataset without sequence numbers in column A

Here’s how you can quickly fill in Column A with a number sequence using the fill handle:

  1. Enter the number 1 in cell A2.
Enter 1 in Cell A2
  1. Enter the number 2 in cell A3.
Enter 2 in cell A3
  1. Select both cells (A2 and A3). You should see a fill handle (small green square) at the bottom right corner of your selection.
Fill handle appears when you select both cells
  1. Drag the fill handle down to the last row of your dataset (or simply double click the fill handle).
Drag the fill handle down

You should automatically get a whole sequence of consecutive numbers, one for each row.

Using the ROW Function to Enter Sequential Numbers in Excel

The above method works great if you simply need to add a sequence of identifiers for each row of your data.

However, your sequencing order will change as soon as you sort the data, or even if you insert/delete a row.

If you need to ensure that the sequencing of the numbers remains the same irrespective of any operations performed on your dataset, then a better option would be to use the ROW function.

The ROW function’s only task is to return the ROW number of the current row.

So if you type the =ROW() in cell A3 or B3 or any cell in row 3, you will get the value 3.

Since we want to start sequencing from the second row onwards (in our example). We can enter the following formula in cell A2:

=ROW()-1

The ROW() function in cell A2 returns the value 2, since it is in the second row.

However, subtracting 1 from the value returned ensures you get one value less for every row number. This means the value in A4 will be 3, and so on.

If, instead of the second row, you needed to start sequencing from the 5th row (say), then your formula would be:

=ROW()-4

Copy the formula down to the rest of the cells in column A using the fill handle.

You will now be left with a sequence of consecutive numbers, one for each row.

Enter ROW formula in cell A2

Note that numbering is not going to get messed up even if you sort your dataset or insert/delete rows (in case you insert a new row, just copy and paste the same formula for that new row).

Apply formula to the entire column

In fact, when you insert a new blank row, the sequencing automatically adjusts itself to ensure that the new row gets its appropriate sequence number.

formula works even when new row is added

Converting the Dataset into an Excel Table

The above two methods work quite well, but you still need to re-sequence your serial numbers whenever you insert a new row.

If you don’t want to be bothered by this additional hassle, you could simply convert your dataset into a table!

Excel tables are a great tool when working with tabular data as they group the data into a single object, allowing for many additional benefits.

One of the many benefits is that the table automatically inserts formulae or updates them whenever you insert or delete a row in it.

Moreover, even if you add new rows to the end of the table, it automatically expands to include the new rows as part of the table.

This means less hassle for you in updating formulae, and once your table is set up, you never have to bother about updating your serial number column again.

To convert your dataset into an Excel table, follow the steps shown below:

  1. Select all cells of the dataset.
  2. Navigate to Insert->Table. Alternatively, you could simply press the shortcut CTRL T from your keyboard.
Click on Insert and then Table
  1. This opens the Create Table dialog box. Make sure the range specified under ‘Where is the data for your table’ is correct.
  2. If your selection included headers, then check the box next to ‘My table has headers’.
Check My Table has headers, if you wish to include headers
Data converted to table

Your selected range of cells should now get converted to an Excel table. You can tell by the change in the formatting of the table:

  • Filter arrows appear next to each column header
  • The dataset is enclosed in a distinguishable box
  • The dataset is styled differently from the rest of the sheet. Rows of the table are styled in alternating colors.
  • When you click on any cell in the dataset, the Design (or Table Design) tab appears in the main menu.
Click on Table Design

Once your table is ready, you can go ahead and enter the following formula in the first row of your table (cell A2):

=ROW()-ROW(Table1[#Headers])

The above formula simply takes the current row number and subtracts from it the row number of the header row of the current table.

Here, we used Table1 as the name of the Excel table. You can replace this name with the name of your table. 

Note: You will find the table name in the Design (or Table Design) tab, in an input box under the label ‘Table Name:’ (when you click on any cell of the table) :

Table Name

When you press the return key, you should find column A containing a sequence of numbers starting from 1 in cell A2.

enter formula in cell A2

This method works irrespective of where your table is located.

Using the SEQUENCE Function to Enter Sequential Numbers in Excel (Only Available in Office 365 and Excel 2021)

Perhaps the easiest way to generate an array of sequential numbers is by using the SEQUENCE function.

The SEQUENCE function is a newly added Excel function. In fact, it is only available in newer versions, like Office 365 and Excel 2021.

This function basically generates sequential numbers in the form of a dynamic array. The syntax for this function is as follows:

SEQUENCE(rows, columns, start, step)

Here,

  • rows is the number of rows that you want returned in the array
  • columns is the number of columns that you want returned in the array .
  • start is the number that you want the sequence to start from. This parameter is optional and by default this value is 1.
  • step is the step value by which you want each number of the sequence to increase/decrease. This parameter is optional and by default, this value is 1.

Since we only want a single column of sequential numbers, it is enough to just specify the first parameter in the function. We do not need to add the optional parameters.

In our example, we want to generate a sequence of 8 consecutive numbers. So we can type the following function in cell A2:

=SEQUENCE(8)

You get an array of 8 sequential numbers displayed in column A as shown:

Enter Sequence formula in cell A2

If you insert a new row into your data, you will notice that the sequence in column A remains put.

However you only have an 8-item array, so your sequence will only last till number 8, even though we now have a new row in our dataset.

New Row added

Does that mean we have to update the parameter in the SEQUENCE function every time there is an addition or deletion of a row?

Absolutely not.

We can use the COUNTA function to keep track of the last row containing data. The following formula should work better:

=SEQUENCE(COUNTA(B:B)-1)
Sequence and COUNTA formula

Try removing a row from the dataset.

Formula auto adjust when row is removed

You will notice that the sequence now gets adjusted to display values till number 7 only.

When you introduce a new row into the dataset and enter some data into it, notice the sequencing gets adjusted to accommodate the new row.

Formula auto-adjust when row is added

The sequencing also expands as you add newer rows to the end of the dataset.

Formula auto adjust when row is added

Note: If your column B contained numeric values (not text), then use the COUNT function instead of COUNTA.

Explanation of the Formula

The COUNTA function simply counts the number of non-null values in a given column.

In our example, the formula: =COUNTA(B:B) will return the value 9, since there are 9 cells in column B (including the header).

But we want to start sequencing from the second row onwards (excluding the header), so we need to subtract 1 from the value returned by the COUNTA function.

Once you get this number, you can then pass it to a SEQUENCE function to get a dynamic array of numbers that change according to the number of rows in column B:

=SEQUENCE(COUNTA(B:B)-1)

When you use this function, you get a sequence of numbers from 1 to 8 (in our case), starting from cell A2.

In this tutorial, we showed you four ways to enter sequential numbers in Excel.

The first method is quite volatile and the sequencing gets easily messed up whenever you alter rows of the dataset. 

The second method does away with this issue, but you will still need to re-sequence every time you add, insert or delete a row. 

The third method is much more robust, but it involves completely reformatting your dataset into an Excel table. 

The fourth method is quite robust as it lets you keep the original formatting of your dataset.

However, the function used in this method (the SEQUENCE function) is only available in newer Excel versions like Office 365 and Excel 2021.

Each method differs in its application and usefulness. You can apply the method that most suits your data.

Other articles you may also like:

How to set up multiple monitors on Windows 11

11-02-2022 · A multi-monitor setup can drastically improve your productivity when multitasking with multiple apps, as adding one or two external monitors will help you create a bigger canvas to distribute the ...

11-02-2022

A multi-monitor setup can drastically improve your productivity when multitasking with multiple apps, as adding one or two external monitors will help you create a bigger canvas to distribute the workload. However, these setups are only helpful if you know how to configure them correctly.

On Windows 11, you have many options and features to support two, three, four, or more displays without having to rely on third-party software or technical assistance to make it all work.

In this Windows 11 guide, we will walk you through the different ways to configure a multi-monitor setup.

How to prepare for multi-monitor setup on Windows 11

Before diving into these steps, connect the displays correctly, including the power and signal cables (HDMI or DisplayPort), and turn on all the monitors.

Also, you want to make sure that Windows 11 is seeing all the monitors:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Confirm all the monitors are on the settings page.
  2. Click the Multiple displays settings.
  3. (Optional) Click the Detect button to force the system to detect any missing displays.

Windows 11 detect monitors

Source: Windows Central (Image credit: Source: Windows Central)

If one of the displays is still missing, recheck the connections, restart the computer, and use the above steps again.

In addition, you also want to check for updates to make sure that the device has the latest system updates and drivers installed for the best experience.

To check updates on Windows 11, use these steps:

  1. Open Settings.
  2. Click on Windows Update.
  3. Click the Check for updates button.
  4. Click the Advanced options setting.

Open Advanced options

Source: Windows Central (Image credit: Source: Windows Central)
  1. Under the "Additional options" section, click the Optional updates setting.

Open Optional updates settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Check the video driver update (if applicable).
  2. Click the Download and install button.

How to rearrange displays on Windows 11

Since it's easy to connect the monitors in the wrong order on the graphics card as you try to configure a dual-monitor or triple-monitor setup, Windows 11 includes an option to rearrange them correctly.

To rearrange multiple displays on Windows 11, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. (Optional) Click the Identify button to determine which monitor you are actually rearranging.
  2. Drag and drop to rearrange each display according to their physical layout on the desktop.Quick tip: Confirm all monitors align at the top perfectly. Otherwise, you may have problems moving the mouse between displays from the corners.

Rearrange monitors on Windows 11

Source: Windows Central (Image credit: Source: Windows Central)

Once you complete the steps, the new layout configuration will apply, allowing you to work across each display and run apps without issues.

How to choose primary display on Windows 11

On Windows 11, you can choose which monitor should be the default to tell the system where apps should open by default and show the system tray and clock.

To change which monitor is the primary, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the non-primary display.
  2. Click the Multiple displays setting.
  3. Check the Make this my main display option.

Choose primary display on Windows 11

Source: Windows Central (Image credit: Source: Windows Central)

Once you complete the steps, you may see a visual effect on the screen to apply the changes, and then you will notice that the system tray and clock will be available from the main display.

How to select viewing mode for multiple displays on Windows 11

It's also possible to change the viewing mode of the displays. For instance, you can expand the main desktop across the new display or mirror both monitors to show the same content on both screens, which can come in handy during a presentation. Alternatively, you can also disable the laptop display and use the external monitor as the only screen.

Choose view mode in Settings

To change the Windows 11 viewing mode, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the monitor you want to customize.
  2. Use the drop-down menu on the bottom-right and select the viewing mode:
    • Duplicate — Shows the same desktop across displays.
    • Extend — Expands the desktops of the first display across all displays.

Change viewing mode

Source: Windows Central (Image credit: Source: Windows Central)

After you complete the steps, the new configuration will apply. The settings would be different depending on the number of monitors connected to the computer.

Choose view mode in Project flyout

Windows 11 also allows you to switch display modes on the fly using the Project feature, which you can access using the Windows key P keyboard shortcut.

Once you invoke the shortcut, a Project flyout will open from the right side with four options:

  • PC screen only — Only the primary display is used.
  • Duplicate — Secondary displays will mirror the primary monitor.
  • Extend — Both screens are combined to offer an extended desktop.
  • Second screen only — Only the secondary displays is used.

Windows 11 Project flyout

Source: Windows Central (Image credit: Source: Windows Central)

Usually, you want to use the Extend option since it allows you to use the primary monitor normally and the secondary at their native resolution creating a single large canvas.

The Duplicate option is also good, but when using a second monitor or projector to show a presentation. In contrast, the Second screen only option is great when you want to close a laptop's lid and work only with the external monitor.

How to change scale and layout settings on Windows 11

Although Windows 11 apply the optimal display settings, sometimes, you may still need to change each monitor's scaling, resolution, and orientation.

Choose predefined scale settings

The scale settings can come in handy when using monitors of different sizes and screen resolutions to text, icons, frames, and other items the same size across displays. If you have a high-resolution monitor, you can use the scale setting to make things bigger and more readable.

To change the best scale settings for you, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the monitor you want to customize.
  2. Under the "Scale & layout" section, use the Scale setting and choose the appropriate scale option.

Change scale settings

Source: Windows Central (Image credit: Source: Windows Central)

Once you complete the steps, you may need to repeat the instructions for the other monitors. Although you don't need to sign out and back in to apply the changes, you may still need to restart some applications to see the scale setting changes.

Choose custom scale settings

To use custom scale settings on Windows 11, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the monitor you want to customize.
  2. Under the "Scale & layout" section, click the Scale setting.

Open custom scale settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Use the Custom scaling setting to use a different scaling size between 100% and 500%.

Custom display scale settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Click the Apply (check) button.

After you complete the steps, you will need to sign out of the account and sign back in to see the new changes. If the scaling doesn't look right, return to the settings and tweak the scaling setting until you land into an acceptable configuration.

If you want to use the predefined scale settings again, turn off custom scaling and sign out. Otherwise, the option will be grayed out.

Choose display resolution

Although Windows 11 can configure the most optimal screen resolution, you may still need to change the resolution manually.

To change the screen resolution on Windows 11, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the monitor you want to customize.
  2. Under the "Scale & layout" section, use the Display resolution settings to choose the correct screen resolution.

Change resolution Windows 11

Source: Windows Central (Image credit: Source: Windows Central)

Once you complete the steps, you may need to repeat the instructions to change the resolution to the remaining monitors.

If you want to make text and other items bigger, you should be using the scale settings instead.

Choose display orientation

Depending on your requirements, you may need to use one or all the monitors vertically instead of the traditional horizontal orientation. If this is the case, you can use the "Display orientation" settings.

To change the display orientation on Windows 11, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the monitor you want to customize.
  2. Under the "Scale & layout" section, use the Display orientation settings to flip the screen in:
    • Landscape.
    • Portrait.
    • Landscape (flipped).
    • Portrait (flipped).

After you complete the steps, the screen will flip to the orientation you selected.

How to manage advanced display settings on Windows 11

It's usually not recommended to change the advanced display settings. However, since every display looks different, you may need to tweak some of the settings to deal with screen flickering or improve the color accuracy.

Configure custom color profile

If one of the displays is not displaying colors accurately, it's possible to use a custom color profile.

You should only use those created by a trusted source or device manufacturer when changing the color profile settings. If you're not sure, you can refer to this guide to download the correct color profile for your monitors.

To configure a custom color profile on Windows 11, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Under the "Related settings" section, click the Advanced display setting.

Open Advanced Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the monitor that you want to configure using the "Select a display to view or change its settings" option.
  2. Under the "Display information" section, click the Display adapter properties option.

Open Display Adapter Settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Click the Color Management tab.
  2. Click the Color Management button.

Open Color Management Settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Click the Devices tab.
  2. Select a display from the list.
  3. Check the Use my settings for this device option.
  4. Click the Add button.

Custom color management settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Click the Browse button and locate the new color profile.
  2. Double-click the .icm file to install the new profile.
  3. Click the Close button.

Custom color profiles

Source: Windows Central (Image credit: Source: Windows Central)

Once you complete the steps, repeat the instructions to set a different color profile for the other monitors.

Change refresh rate

The default refresh rate (frames per second) of 59Hz or 60Hz is typically suitable for most users. However, if you have monitors that support a higher refresh rate or notice screen flickering, increasing the settings can provide a better and smoother viewing experience.

To set a different refresh rate on Windows 11, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Under the "Related settings" section, click the Advanced display setting.

Open Advanced Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the monitor that you want to configure using the "Select a display to view or change its settings" option.
  2. Change the refresh rate with the "Choose a refresh rate" setting.

Change refresh rate on Windows 11

Source: Windows Central (Image credit: Source: Windows Central)

After you complete the steps, you may need to repeat the steps to adjust the refresh rate on the remaining display.

Enable variable refresh reate

Variable refresh rate (VRR) is a technology available on supported monitors that dynamically increases and decreases the refresh rate according to the content to save battery life.

To enable VRR on Windows 11, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Under the "Related settings" section, click the Advanced display setting.

Open Advanced Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the monitor that you want to configure using the "Select a display to view or change its settings" option.
  2. Choose the Dynamic option in the "Choose a refresh rate" setting.Quick note: If the option is not available, the device doesn't support the feature.

Change refresh rate on Windows 11

Source: Windows Central (Image credit: Source: Windows Central)

Once you complete the steps, Windows 11 will dynamically adjust the refresh rate to balance the screen performance and battery life.

Enable multiple displays features

Windows 11 includes a few new features to improve the multiple-monitor experience. For example, when you disconnect the external display, all the apps on the secondary display will minimize automatically. Then when you reconnect the display, the apps will restore automatically to their original location.

To enable these features, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Display page on the right side.

Open Display settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Click the Multiple displays setting.
  2. Check the Remember window locations based on monitor connection option.

Multiple displays settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Check the Minimize windows when a monitor is disconnected option.

When disconnecting the external monitor, all the apps will minimize in the Taskbar when using these settings. Then when you reconnect the display, all the apps will restore automatically to their original locations.

How to show Taskbar across multiple monitors on Windows 11

To show the Taskbar across displays, use these steps:

  1. Open Settings.
  2. Click on Personalization.
  3. Click the Taskbar page on the right side.

Open Taskbar settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Click the Taskbar behaviors setting.
  2. Check the Show my taskbar on all displays option.

Show my taskbar on all displays

Source: Windows Central (Image credit: Source: Windows Central)
  1. (Optional) Use the When using multiple displays, show my taskbar apps setting and choose how apps will appear in the Taskbar:
    • All taskbars.
    • Main taskbar and taskbar when window is open.
    • Taskbar where window is open.

After you complete the steps, the Taskbar will appear across all monitors.

How to change background on multiple displays on Windows 11

Windows 11 also allows you to set a different background image on each display to make the experience more personalized by using the slideshow option or by manually selecting a different wallpaper on each monitor.

Show different wallpapers with slideshow

To change the wallpaper of each monitor with the slideshow option, use these steps:

  1. Open Settings.
  2. Click on Personalization.
  3. Click the Background page on the right side.

Open Background settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the Slideshow option from the "Personalize your background" setting.
  2. Click the Browse button.

Windows 11 wallpaper slideshow

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select a folder with a collection of images to rotate on all the monitors.
  2. Click the Choose this folder button.
  3. Select the rotation frequency using the "Change picture every" drop-down menu.
  4. Turn on the Shuffle toggle switch.
  5. (Optional) If you're using different sized images, use the Choose a fit drop-down menu and select the Fill option.

Once you complete the steps, Windows 11 will randomly assign a wallpaper, depending on the rotation frequency you selected.

Show different wallpapers manually

To set a different background for each display manually, use these steps:

  1. Open Settings.
  2. Click on Personalization.
  3. Click the Background page on the right side.

Open Background settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the Picture option from the "Personalize your background" setting.
  2. Click the Browse button.
  3. Select the wallpaper and click the Choose picture option.
  4. Right-click the image and select the monitor to display the wallpaper.

Set per monitor

Source: Windows Central (Image credit: Source: Windows Central)

After you complete the steps, repeat the instructions to assign a different background for the remaining monitors.

More Windows resources

For more helpful articles, coverage, and answers to common questions about Windows 10 and Windows 11, visit the following resources:

Tech tip: How to see multiple windows on the same computer ...

04-02-2022 · Split-screen mode. You may not have the space to add a second monitor or it may simply not be allowed at your place of employment. Luckily there’s a trick to enjoying the benefits of multiple ...

04-02-2022

Whether you’re working at home or at the office, there’s always a way to increase productivity. From limiting distractions to organizing your files, there is no definitive list on how to get more done in less time.

A second monitor can have a large effect on productivity. Not everyone has the space for this, but a vertically-oriented monitor can solve that issue. Not only that, but a vertical monitor is ideal for scrolling through websites and text. Tap or click here for tips on setting up a second monitor for vertical orientation.

You can get more done with one monitor by spitting up your screen. This is great for simulating a dual-monitor setup without having to purchase a second one.

You may not have the space to add a second monitor or it may simply not be allowed at your place of employment. Luckily there’s a trick to enjoying the benefits of multiple monitors on a single screen.

RELATED: 7 new tips and tricks to make Windows 11 more useful

There are many advantages to using multiple windows on the same computer screen. You can have two apps open simultaneously without having to keep switching between them.

You can keep a chat application open on one side and your word processor on the other. If you deal with lots of email messages for work, you can keep your inbox open while using your work applications.

In times like these of constant conference calling, you can keep your video chat open on one side while using an application on the other. You’ll discover more ways to use this feature on your own. Now we’ll show you how to set it up.

Snap your Windows

With Windows, you can “snap” multiple windows in place using your mouse and keyboard. This lets you work with multiple windows and applications simultaneously on your screen.

Windows 10 supports up to four snaps while Windows 11 can support more depending on your monitor size.

How to snap windows using your mouse:

  • Click and hold on the title bar of the window you want to snap and drag it to the right or left edge of your screen.
  • You’ll see an outline indicating where the window will snap to when you drop it.
  • Release the mouse button to snap the window in place.

How to snap windows using your keyboard:

  • Select the window you want to snap and press the Windows Logo Key   Left Arrow or the Windows Logo Key   Right Arrow to snap the window to the side of the screen where you want it to be.
  • Once you’ve moved the window to one side, you can move it to a corner by pressing the Windows Logo Key   Up Arrow or the Windows Logo Key    Down Arrow.
  • Now you can use the Windows Logo Key   Arrow Keys to move the window wherever you want.

Snap Assist makes it easy to organize your desktop windows using your mouse:

  • Once you’ve snapped a window, you’ll see other open windows displayed as thumbnails.
  • Click the thumbnail of a window you want to open in the empty screen space. Now you can resize both open windows simultaneously by clicking and dragging the dividing line.

Windows 11 also added Snap layouts, which offer visual cues for snapping your windows.

  • Hover over a window’s maximize button or select a window and press Win Z.
  • Choose a snap layout.

RELATED: Windows 11: 5 best tips, tricks and features to try now

Split the view on your Mac

Split View displays two windows side-by-side on your Mac, which can be resized to your liking.

Using Split View with macOS Catalina or later:

  • Hover your mouse pointer over the full-screen button in the upper-left corner of a window or click and hold the button.
  • Choose Tile Window to Left of Screen or Tile Window to Right of Screen from the menu. The window then fills that side of the screen.
  • Now click a window on the other side of the screen to use both windows side by side.

Using Split View with macOS Mojave, High Sierra, Sierra, or El Capitan:

  • Click and hold the full-screen button in the upper-left corner of a window. 
  • As you hold the button, the window shrinks and you can drag it to the left or right side of the screen.
  • Release the button, then click a window on the other side of the screen to use both windows side by side.

You can do the following while using Split View:

  • Click anywhere in a window to work there.
  • Move your pointer to the top of the screen to show the menu bar.
  • Swap your windows by dragging one to the other side.
  • Drag the vertical line between the windows to adjust their size.

You may also like: Did you know you can use your iPad as a second display? Tap or click here for tips and tricks to use with your Apple tablet.

What Is Mary J. Blige's Net Worth After the Super Bowl

14-02-2022 · Mary J. Blige's Net Worth Is Massive. According to Celebrity Net Worth she's worth about million thanks to a truly amazing career—and her monthly earnings are a staggering 0,000 (a number ...

14-02-2022

Mary J. Blige is joining Dr. Dre, Snoop Dogg, Eminem, and Kendrick Lamar onstage for the Super Bowl halftime show, and she can probably expect her net worth to skyrocket as a result (and not thanks to a performance fee, because not-so-fun fact: The NFL doesn’t pay!). But before we get to Super Bowl money, let’s dive into how much Mary has in the bank real quick.

Mary J. Blige’s Net Worth Is Massive

According to Celebrity Net Worth, she’s worth about million thanks to a truly amazing career—and her monthly earnings are a staggering 0,000 (a number that’s known due to divorce docs). Mary’s had some financial troubles over the years with the IRS and the state of New Jersey, but it looks like those have largely been settled.

mary j blige in concert las vegas nv

Ethan MillerGetty Images

So, What Is She Making for the Super Bowl?

Technically nothing because the NFL doesn’t pay performers. They justify the lack of payment due to the Super Bowl giving halftime artists a massive platform and huge post-show spikes in music sales.

This content is imported from Instagram. You may be able to find the same content in another format, or you may be able to find more information, at their web site.

Remember when Shakira and J.Lo performed back in 2020? Apparently, Jennifer Lopez’s streams jumped by 335 percent, while Shakira’s jumped by 230 percent. Meanwhile, Billboard reported that the specific songs they performed saw a 1,013 percent sales increase the day of the Super Bowl, selling 16,000 digital downloads, which was up from around 1,000 the day before. In other words, Mary J. Blige (and the rest of the halftime show performers) are going to be making a ton of money just for showing up onstage. And yep, Mary dropped new music right in time for this historic show. Her first album in five years, Good Morning Gorgeous, is officially available now—and you better believe it’ll see a bump in sales after tonight!

This content is created and maintained by a third party, and imported onto this page to help users provide their email addresses. You may be able to find more information about this and similar content at piano.io

How to launch apps automatically during startup on Windows ...

15-02-2022 · 2 days ago · To start an app automatically through the Startup folder, use these steps: Open Start. Search for Run and click the top result to launch the …

15-02-2022

Windows 11 Startup apps

Windows 11 Startup apps (Image credit: Windows Central)

If you have a group of apps you open immediately every time you sign into your Windows 11 account, it's possible to configure these applications to launch automatically to save extra steps and get to them faster.

You have at least four ways to auto-start an app on Windows 11. If the app can start automatically by design, you can control this behavior from the "Startup" settings page or the app's preference page. In addition, you can place a shortcut in the "Startup" folder, which the system will detect and run to launch the program automatically, or you can create a task to launch the app automatically as the user logs in.

In this Windows 11 guide, we will walk you through the different ways to launch apps automatically on your computer.

How to configure app automatic start with Startup settings

To launch an app startup on Windows 11, use these steps:

  1. Open Settings.
  2. Click on Apps.
  3. Click the Startup page on the right side.

Open Startup settings

Source: Windows Central (Image credit: Source: Windows Central)
  1. Turn on the toggle switch for the app you want to launch at startup.

Enable app at Startup settings

Source: Windows Central (Image credit: Source: Windows Central)

Once you complete the steps, the app will start as you sign into the account automatically. You may need to repeat the steps to configure other apps.

Windows 11 also includes the "Startup" folder, a known folder that the system checks every time you sign in and run any app or script found in the location. If the app you want isn't available through the Settings app, you can place a shortcut to launch automatically on startup.

To start an app automatically through the Startup folder, use these steps:

  1. Open Start.
  2. Search for Run and click the top result to launch the tool.
  3. Type the following command and click the OK button.shell:startup

Open Startup folder

Source: Windows Central (Image credit: Source: Windows Central)
  1. Click the New menu and select the Shortcut option.

Explorer Shortcut option

Source: Windows Central (Image credit: Source: Windows Central)

Create shortcut option

Source: Windows Central (Image credit: Source: Windows Central)
  1. Open the app installation folder.Quick tip: Classic 32-bit applications are usually installed in the "Program Files (x86)" folder, and 64-bit applications are typically installed in the "Programs Files" folder.
  2. Select the app executable (.exe) file that launches the program.Quick note: Usually, the exe file has the name (or part of the name) and the icon of the program. For instance, the "Mozilla Firefox" executable file is the "firefox.exe" file.
  3. Click the OK button.
  4. Click the Next button.
  5. Click the Finish button.

After you complete the steps, Windows 11 will launch any app, shortcut, or script that it finds in the Startup folder.

How to configure app automatic start with app preferences

You may also be able to configure an app to launch at startup from the app's settings. Here's an example to enable Microsoft Teams (consumer) to launch at startup automatically:

  1. Open the Microsoft Teams app.
  2. Click the Settings and more (three-dotted) menu.
  3. Select the Settings option.

App Settings option

Source: Windows Central (Image credit: Source: Windows Central)
  1. Click on General.
  2. Check the Auto-start Teams option.

Classic program auto-start option

Source: Windows Central (Image credit: Source: Windows Central)

Once you complete the steps, the app will launch automatically at startup. Although these steps are specific to the consumer version of Microsoft Teams, the concept applies to most classic desktop programs.

How to configure app automatic start with Task Scheduler

Alternatively, it's also possible to run apps during startup by creating a scheduled task using the Task Scheduler app.

To auto-start apps on Windows 11 with Task Scheduler, use these steps:

  1. Open Start.
  2. Search Task Scheduler and click the top result to open the app.
  3. Right-click the "Task Scheduler Library" branch, and select the New Folder option.

Create New Folder option

Source: Windows Central (Image credit: Source: Windows Central)
  1. Type a name for the folder — for example, MyTasks.Quick note: This step isn't a requirement, but it's a recommended step to keep your tasks separate from the system and apps tasks.
  2. Click the OK button.
  3. Expand the "Task Scheduler Library" branch, and select the MyTasks folder.
  4. Click the Action menu.
  5. Select the Create Basic Task option.

Create Basic Task option

Source: Windows Central (Image credit: Source: Windows Central)
  1. Confirm a name for the task.

Task name setting

Source: Windows Central (Image credit: Source: Windows Central)
  1. (Optional) In the "Description" field, create a description for the task.
  2. Click the Next button.
  3. Select the When I log on option.Quick tip: You could select the "When the computer starts" option, but it might require changing the "Security options" in the advanced properties of the task to work correctly.

Task trigger when I log in

Source: Windows Central (Image credit: Source: Windows Central)
  1. Select the Start a program option.

Start a program option

Source: Windows Central (Image credit: Source: Windows Central)
  1. Click the Next option.
  2. Click the Browse button.

Select the app to auto-start

Source: Windows Central (Image credit: Source: Windows Central)
  1. Open the app installation folder.
  2. Select the app executable (.exe) file that launches the program.
  3. Click the Open button.
  4. Click the Next button.
  5. Click the Finish button.

Once you complete the steps, the app will launch automatically on Windows 11 every time you sign in.

While there are many ways to launch apps automatically, it's worth pointing out that having too many apps can affect system performance. You should only auto-start those that you need the most. If you have a lot of apps launching at startup, you can use these steps to disable those you don't need.

More Windows resources

For more helpful articles, coverage, and answers to common questions about Windows 10 and Windows 11, visit the following resources:

1883 Season 2: News, Cast, Premiere Date, Spoilers, and More

28-02-2022 · A post shared by 1883 Official (@1883official) Again, nothing is set stone—but if 1883 follows in Yellowstone 's footsteps, then most of the star-studded cast from the first season will be back for 1883 season 2. This would include some of the show's biggest stars, like Tim McGraw, Faith Hill, Sam Elliott, and LaMonica Garrett.

28-02-2022

If you're a longtime fan of Yellowstone, then you've probably been lassoed in by its new prequel series 1883.

Paramount's latest western tells the gripping origin story of the Dutton family and their journey "across the Great Plains toward the last bastion of untamed America." Throughout the first 10 episodes, 1883 explains how the earliest Dutton ancestors created the Montana ranch at the center of all the present-day drama that makes Yellowstone so captivating.

While the entire first season has not even been released yet, fans are already wondering: Will 1883 return for season 2? Here's what we know so far!

Is 1883 season 2 happening?

Not exactly. Paramount has officially announced that 1883, which just wrapped its first season, will return for "additional episodes" following a "record-breaking performance" that made the series the most-watched show on Paramount to do. Given the loyal following of the Yellowstone universe—which also includes a podcast and a behind-the-scenes special—this news comes as no surprise.

This content is imported from Instagram. You may be able to find the same content in another format, or you may be able to find more information, at their web site.

"The incredible storytelling and stellar performances behind 1883 have fueled phenomenal new records for Paramount ," Tanya Giles, chief programming officer of ViacomCBS Streaming said in a statement. "We look forward to bringing fans even more of the Duttons’ origin story."

Still, some fans may be wondering why the series isn't getting the full treatment of a second season. According to executive producer David Glasser, this movie was an intentional way to transition to the newest Paramount series: 1932.

"I don’t want to give away too much, but [1932] was always intended to be the second season," he told The Hollywood Reporter. "Now the network is excited to bring you something really additional to 1883, which is super exciting."

Okay, so we get additional episodes and an entirely new show. Works for us! However, the network has not yet announced when any of us this will air. Hopefully we don't have to wait too long!

Who will be in the 1883 season 2 cast?

This content is imported from Instagram. You may be able to find the same content in another format, or you may be able to find more information, at their web site.

Nothing is set stone, especially after that shocking 1883 finale—but it's likely that additional episodes of 1883 will feature the remaining characters in the star-studded cast who are still alive.

What do you want to see more of in future episodes of 1883 or 1932? Tell us in the comments!

This content is created and maintained by a third party, and imported onto this page to help users provide their email addresses. You may be able to find more information about this and similar content at piano.io

seniorcare2share.com

17-12-2021 · The final metric point on the ruler is 30.5, making the ruler 30.5 cm long. The longest lines at each centimeter number indicate the centimeters along the edge of the ruler. Is a ruler cm or MM? A metric ruler is the standard instrument for measurement in the scientific laboratory. On a metric ruler, each individual line represents a millimeter ...

17-12-2021

What do the numbers on a scale ruler mean?

An Architect’s or scale ruler is designed for use in determining the actual dimensions of a distance on a scaled drawing. For example, 1/8 on the ruler is in fact a scale that converts 1/8 inch on the drawing to 1 foot. This would represent a drawing with a scale of 1/8″ = 1 foot.

How do you read scale drawings?

The scale is shown as the length in the drawing, then a colon (“:”), then the matching length on the real thing. Example: this drawing has a scale of “1:10”, so anything drawn with the size of “1” would have a size of “10” in the real world, so a measurement of 150mm on the drawing would be 1500mm on the real horse.

How many scales are on an architect’s ruler?

For accuracy and longevity, the material used should be dimensionally stable and durable. Scales were traditionally made of wood, but today they are usually made of rigid plastic or aluminum. Architect’s scales may be flat, with 4 scales, or have asymmetric 3-lobed cross-section, with 6 or 12 scales.

How do you read scales on architectural drawings?

For example, a floor plan of a building drawn using a metric scale of 1:100 (pronounced “one to a one hundred”), means that for each unit that is measured on the drawing (the 1), the real world size of it is 100 times larger (the 100) than it appears.

What does a 1/4 scale mean?

Example – Blueprint Drawing Scale 1:50 An actual length of 1 cm is measured on a 1:50 blueprint floor plan. The physical length can be calculated as. (1 cm) 50 = 50 cm. Imperial Units – US. A 1/4″ scale means that each 1/4″ (inch) on the plan counts for 1′ (feet) of actual physical length.

What does a 1/2 scale mean?

Half scale is 1:2. It is helpful to think of this as one unit on the drawing equals two units on the object. This means the drawing of the object is twice as large as the object itself. Designers use an enlarged scale, such as double scale, on objects that are too small to draw full size with any meaningful detail.

How do you read cm on a ruler?

Each centimeter is labeled on the ruler (1-30). Example: You take out a ruler to measure the width of your fingernail. The ruler stops at 1 cm, meaning that your nail is precisely 1 cm wide. So if you counted five lines from 9 cm, for instance, you’d get 9.5 cm (or 95 mm).

What are architectural measurements?

Drawing Size Reference Table, Architectural and Engineering Drawing Sizes Standard US Architectural Drawing Sizes Drawing Size Dimensions (millimeters) Dimensions (inches) ARCH A 228.6 x 304.8 9 x 12 ARCH B 304.8 x 457.2 12 x 18 ARCH C 457.2 x 609.6 18 x 24.

How do you read a 1 75 scale?

On this scale, each small division represents 2 mm, and each longer bar represents 10 mm. On the 1:75 scale, the intermediate is not numbered, but it is there at, again, 500 mm. The 1, 2, 3, etc are metres, and each small division is 5 mm. You just have to use the scales to get a feel for the divisions.

How do you read a blueprint scale?

Lay the proper scale next to the item on the drawing and take the measurement. The scale will translate for you. As an example, a 1/4 inch = 1 foot architect scale will have markings that increase by 1 foot every 1/4 inch; a 4 foot wall is represented by a 1-inch length, if measured with a conventional ruler.

What are all of the scales on the architects scale?

Common scales for a triangular architect’s scale are: 16 (full), 3, 1-1/2, 1, 3/4, 1/2, 3/8, 1/4, 1/16, 1/8, 3/32. Major divisions of each scale represent feet which are further subdivided into 12ths or 16ths. A scale labeled 1/8 translates to 1/8″ = 1′ or 1/96 scale.

How do you calculate scale?

To scale an object to a larger size, you simply multiply each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 5 cm, you simply multiply 5 × 6 = 30 cm to get the new dimension.

What does scale 1.50 mean?

1:50 is a ratio. it means you’re scaling 1 unit to 50 units. that could be inches (1″=50″) or miles (1 mile=50 miles) or anything else, but it’s a direct scale.

What does a 1/8 scale mean?

Scale is a measurement we use to give customers an idea of how big your model will be when comparing to the real-life object. If you see the scale 1:8, this means your completed model will be eight times smaller than the real thing.

What is a 1/6 scale?

Items in 1:6 scale, also known as “Playscale” or “Fashion Doll” scale, are sized to fit with common fashion dolls such as Barbie or collectible action figures, principally military action figures. In this scale, 1 inch is equivalent to 6 inches in full size.

What is the standard architectural scale?

Architect scales, such as 1/4˝ = 1´-0˝ (1/48 size) or 1/8˝ = 1´-0˝ (1/96 size), are used for structures and buildings. They are used to measure interior and exterior dimensions such as rooms, walls, doors, windows, and fire protection system details.

How do you use a 1/10 scale?

In the real world, one meter is equal to one meter. A drawing at a scale of 1:10 means that the object is 10 times smaller than in real life scale 1:1. You could also say, 1 unit in the drawing is equal to 10 units in real life.

What does a 1/100 scale mean?

Ratio scales If the scale of the plan is 1 : 100, this means the real measurements are 100 times longer than they are on the plan. So 1 cm on the plan represents a real length of 100 cm (1 metre).

Which side is cm on a ruler?

The metric side of the ruler has centimeter numbers from 1 on the far left up to 30 on the far right. The final metric point on the ruler is 30.5, making the ruler 30.5 cm long. The longest lines at each centimeter number indicate the centimeters along the edge of the ruler.

Is a ruler cm or MM?

A metric ruler is the standard instrument for measurement in the scientific laboratory. On a metric ruler, each individual line represents a millimeter (mm). The numbers on the ruler represent centimeters (cm). There are 10 millimeters for each centimeter.

Related Posts
Zendaya’s Boyfriends: Learn About Her Dating History ...

11-12-2021 · Zendaya was quick to put the rumors to rest, however, as she spoke out on their relationship a few weeks later. “First of all it wasn’t really a date,” she explained to 92.3 AMP radio .

11-12-2021
Zendaya
View gallery
Image Credit: VICKIE FLORES/EPA-EFE/Shutterstock

Zendaya has always been notoriously private about her personal life, notably, her relationships. Even as speculation about her love life made headlines, the Emmy winner, born Zendaya Maree Stoermer Coleman, 25, has managed to remain impressively mum about the details. She has, however, been romantically linked to many of her co-stars, including her Spider-Man colleague and “best friend” Tom Holland.

The actress and Tom, 25, have been at the center of romance rumors as far back as the first Spider-Man film, Spider-Man: Homecoming, in 2017. And at long last — after several years and other romantic partners in between — the two (unwittingly) confirmed that they were an item after they were photographed kissing in Los Angeles in July, effectively breaking the internet as the photos circulated online.

So, how did Zendaya and Tom’s relationship blossom? And who else has the Euphoria star been romantically linked to throughout the course of her illustrious career? Below, a look back at some of the people Zendaya has been romantically involved with and/or presumed to be romantically involved with; plus, what the actress has said about them.

Tom Holland

Zendaya
Zendaya and Tom Holland have recently confirmed their relationship. (Shutterstock)

Although the romance rumors of Zendaya and Tom have simmered since they first co-starred in the Marvel franchise, the pair avoiding adding fuel to the fire. Zendaya even called out the gossip of them “vacationing” together when she tweeted in July 2017, “Wait wait…my favorite is when it says we go on vacations together HA! I haven’t been on a vacation in years!”

Once the snap-seen-around-the-world surfaced, however, it was obviously something had been developing between pair for quite some time. For how long exactly is still a mystery, as the adorable couple remain tight-lipped on the subject. And even with keeping the details private, Tom made it known they still feel “robbed” of their privacy. “One of the downsides of our fame is that privacy isn’t really in our control anymore, and a moment that you think is between two people that love each other very much is now a moment that is shared with the entire world,” he told GQ. “We sort of felt robbed of our privacy. I don’t think it’s about not being ready — it’s just that we didn’t want to [talk about it].”

Fans still get little snippets of their love affair here and there, though, as Tom has left a series of flirty comments on social media over the last few months, while Zendaya called him “very charismatic” in a recent InStyle interview.

Jacob Elordi

Zendaya
Zendaya and Jacob Elordi were long-rumored to be an item after the pair co-starred in HBO’s Euphoria. (SplashNews)

Zendaya and Australian heartthrob Jacob Elordi were long-rumored to be an item after the pair co-starred in the first season of HBO’s Euphoria as high school rivals Rue and Nate, respectively. They were first linked romantically after taking a trip to Greece together back in August 2019. A few months later, Zendaya would fly with Jacob down to Australia to enjoy a vacation with his family. An outing to New York and a movie night in Los Angeles also fanned the flames of a love match. Then an affectionate kiss by Jacob on Zendaya’s head in 2020 really sent fans into a frenzy.

Even after Jacob congratulated Zendaya on her Emmy win for Euphoria, the pair never publicly revealed if they were ever in a romantic relationship. In what appeared to be a denial, Jacob said he thought of Zendaya “like a sister” in a GQ interview, while she called him her “best friend” when she presented the actor with the Rising Star honor at the American Australia Association Arts Awards, per Elle.

Odell Beckham Jr.

Zendaya
Zendaya was spotted with NFL player Odell Beckham Jr. at a party for the 2016 Grammys. (Richard Shotwell/Invision/AP/Shutterstock)

Walking the red carpet together will certainly get folks talking! And that’s exactly what happened when Zendaya was spotted with NFL player Odell Beckham Jr. at a party for the 2016 Grammys. Zendaya was quick to put the rumors to rest, however, as she spoke out on their relationship a few weeks later.

“First of all it wasn’t really a date,” she explained to 92.3 AMP radio. “We went to some events together, because we’re friends. We were with a group, we were with multiple people.” She then joked about how her dad will definitely have a say if if they dated. “Even if it does progress, you gotta go through my dad first. Just because you’re in the NFL, you killin’ stuff, that doesn’t mean you get to skip past pops. He’s not going to allow that to happen.”

Trevor Jackson

Zendaya
A relationship between Zendaya and ‘Grown-ish’ actor Trevor Jackson has never been confirmed. (Rob Latour/Shutterstock)

A relationship between Zendaya and Grown-ish actor Trevor Jackson has never been confirmed, but that never stopped the speculation that something had gone on between the pair. Fans first linked them together after she starred in his music video “Like We Grown” back in 2013. But both parties have insisted it was always plutonic. “There’s going to be those rumors. But he’s my best friend in the whole world,” Zendaya said of Trevor to HipHollywood in 2014. “I love him to death … That’s all it is.”

Showing page 5 of 100